About the CEO
Engineer Reza Mehtar Qara Daghi
Individual profile
Name and Surname: Reza Mehtar Qara Daghi
Born: 1975 May 30
Issued from Tehran
شرکتهای همکار
General electroplating materials and equipment
Electrophoretic varnish
Solution heating and temperature control systems
Plating solution pump and filter
Fully automatic plating lines
Fully automatic plating lines
Ecotechno Italy
Plating materials for precious metals
Education:
Bachelor’s Degree in Metallurgical Engineering and Materials from Iran University of Science and Technology, 1998 (1377 in the Iranian calendar).
- Thesis Title: Recovery of Nickel from Used Vegetable Oil Catalysts
Master’s Degree in Corrosion Engineering and Protection of Metallic Materials from the University of Tehran, 2000 (1379 in the Iranian calendar).
- Thesis Title: Application of Gold Coating on Aluminum Using the Electroless Method
Work Experience:
Electroplating Specialist and Materials Researcher at a state-owned factory, 1996-2000 (1375-1379 in the Iranian calendar).
Project Manager and Surface Engineering Manager at Modiran Industrial Group, 2000-2001 (1379-1380 in the Iranian calendar).
CEO of Iran Board Electronics Company, 2002-present (1381 to present in the Iranian calendar).
Board Member and Vice Chairman of the Board at Simabgaran Parsian Electroplating Complex, 2016-2019 (1395-1398 in the Iranian calendar).
Scientific and Research Experience:
Presented Paper: “Investigation of the Effect of Heat Treatment Regime on the Structure and Properties of 2024 and 7075 Aluminum Alloys” at the Second National Seminar on Surface Engineering of Iran, May 1997 (Ordibehesht 1376).
Presented Paper: “Investigation of Effective Parameters on Gold Coating by Chemical Immersion Method” at the Fourth Annual Congress of the Iranian Metallurgical Engineers Society, October 2000 (Mehr 1379).
Presented Paper: “Recovery of Nickel from Used Hydrogenation Catalysts of Vegetable Oil by Segregation Method” at the Second Congress of Non-Ferrous Metals Metallurgy of Iran, May 2000 (Ordibehesht 1379).
Presented Paper: “Creation of Black Oxide Coating on Maraging Steel” at the First Scientific-Applied Conference of Aerospace Industries, September 2000 (Shahrivar 1379).
Published Multiple Articles in Aluminum Industry Journal and Electroplating Industry Journal.
Authored Books on Nickel Electroplating, Alloy Galvanized Electroplating, and Troubleshooting in Electroplating Solutions using the Hull Cell Method.
Participation in Training Courses:
- Attended multiple advanced electroplating training courses in Germany and Italy from 2000 to 2019 (1379-1398 in the Iranian calendar).
- Completed an electroplating automation training course at PAL in Hong Kong in 2009 (1388).
- Participated in three training courses on various types of filtration pumps for electroplating solutions in the Netherlands in 2008, 2013, and 2018 (1387, 1392, 1397).
- Attended two training courses on PCB electroplating in Italy in 2011 and 2019 (1390, 1398).
- Completed a training course on modern electroplating equipment for heating and level control systems in Germany in 2012 (1391).
- Participated in two training courses on advanced electroplating technology equipment in India in 2001 and 2010 (1380, 1389).
- Attended new wastewater neutralization technologies training courses in Hungary in 2006 (1385) and Italy in 2015 (1394).
- Completed a training course on precious metal electroplating and MMO anodes at Umicore in Germany in 2014 (1393).
- Participated in a productivity training course at the Iranian Electroplating Industries Cooperative in 2006 (1385).
- Attended Electrolak electroplating training courses in Turkey in 2016 and 2017 (1395, 1396).
- Completed a training course at Ecotechno in Italy on water recycling and production cycle systems in 2018 (1397).
- Attended an aluminum anodizing training course in Turkey in 2022 (1401).
Teaching and Educational Experience:
Instructor for general electroplating courses, and nickel and galvanizing electroplating courses at Sharif University of Technology, in collaboration with the Faculty of Chemical and Petroleum Engineering and the Iranian Electroplating Industries Association.
Judge for the Electroplating Industry Festival (Professor Kanani Award) since 2010 (1389 in the Iranian calendar).
Collaborator with Iran University of Science and Technology, University of Tehran, Sharif University of Technology, and Isfahan University of Technology on industrial-research projects and involvement in over 30 master’s and doctoral theses.